|
|
Fiber
Optic Connectors is an important components used in the fiber optic
network. It is also the key part used in patch cord and pigtail. There are many kinds of
fiber optic connectors. We
supply one piece fiber optic connectors various types, including
standard connectors and irregular types, epoxy types. We supply types include: SC fiber optic connectors, FC fiber optic connectors,
ST fiber optic connectors, LC fiber optic connectors, MU fiber optic
connectors, SC/APC fiber optic connectors, FC/APC fiber optic connectors,
etc. Both Single mode fiber optic connectors and multimode fiber optic
connectors available.
There are Single mode fiber optic connector and Multimode fiber optic
connector, Single mode fiber optic connectors can be with PC, or UPC or
APC polish, while Multimode fiber optic connectors only with PC or UPC
polish. PC or UPC or APC refer to how we polish the ferrule of the fiber
optic connectors. Judging from the out looking, Multimode connectors are
usually with black boot or beige color, Single mode PC and UPC ones are
usually with blue or black color, Single mode APC is with green color.
Insertion loss is important technical data of the fiber optic
connectors. The smaller the better. APC insertion loss is smaller than
UPC, UPC is smaller than PC.
E2000 fiber optic connector
E2000 fiber optic connectors is one of the newly developed types, which
features a spring-loaded shutter used to protect the ferrule from dust
and scratches. E2000 fiber connectors is similar size of SC fiber
connectors. There are single mode E2000 fiber connectors and
Multimode E2000 fiber connectors. UPC, APC polish types.
SC fiber optic connector
SC fiber optic connectors is with push-pull structure; it is one of the
earliest and most commonly used types. With the plastic housing, the SC
fiber optic connector is low cost. But it is also with good accuracy; SC fiber
optic connector is widely used in mass installations.
FC fiber optic connector
Same as SC fiber optic connectors, FC is also invention of NTT Company from
Japan. FC is with metal housing, screw structure, as the same products
developed by one company, FC fiber optic connector ferrule and sleeves
used in FC adaptor are both same as SC ones.
ST fiber optic connector
ST fiber optic connectors is also a metal structure, unlike FC
fiber optic connector; ST is a push-pull type, not screw type as FC.
ST are usually used in 10Base-F while SC usually used in 100Base F,
ferrule of ST fiber optic connector is exposed outside, SC fiber
optic connector
ferrule is designed to be inside of the housing.
LC fiber optic connector
LC fiber optic connectors is the short form for the company name Lucent, LC
structure is similar like the RJ ones, and it is push and pull. Size of
ferrules and sleeves used in LC fiber connector and LC fiber adaptor is
half of SC and FC, it is 1.25mm. LC is widely used in single mode fiber
network, and it is more and more used in multimode network as well.
MT-RJ fiber optic connector
MT-RJ was developed based on NTT's MT connector, and with the RJ-45
style structure, so it got the name MT-RJ. MTRJ connector is with duplex
fiber channel inside one single connector, the space between the two
channels is 0.75mm. MT-RJ is widely used for data transmission.
MU fiber optic connector
MU is short form of Miniature unit Coupling, it was developed by NTT
based on SC fiber optic connector, MU is by now the smallest single
ferrule fiber optic connector in the world, so it is good choice for
densely installation. NTT has developed a series of MU products. As the
fiber optic network bandwidth goes bigger and with wide use of DWDM,
demand of MU fiber products is also increasing.
All above fiber optic connectors are with ceramic ferrules with various
sizes, except for MT-RJ ones. MT-RJ is with plastic ferrule.
SMA fiber optic connector
We supply medical use SMA 905 and SMA906 series fiber connectors & cable
assemblies. These products make use of threaded connections and are used
for connection of some of the medical equipment because of their low
cost multimode coupling. Unlike common type of patch cables
with ceramic ferrules, SMA 905 and SMA 906 fiber optic connectors are
with stainless alloy or stainless steel ferrules.
Field Assemblies Fiber Optic Connectors
The new series of field assembling connectors enable fcable
assembly in filed working to be simple, quick and cost effective. there
are various types to fit for 0.9mm , 2.0mm and 3.0mm optic cables.Compliant with standard IEC 61745, EIA/TIA 568 and ROHS
compliant.
Stainless steel housing Integrated & Sealed Fiber Optic Connectors
Integrated with and shielded by stainless steel housing, these new fiber
optic connectors are Sealed and Resistant to temperature, chemicals and
corrosive materials. LC, SC, MT-RJ, etc types available. 45 degree and
90 degree Fiber Connectors & irregular ferrule Fiber Connector.
Besides the standard fiber optic connectors ,we supply fiber
connector with irregular size ferrules, for example, long/short ferrule
,with various sized ,we also supply connectors with 45
degree or 90 degree boot, we offer custom design and manufacturing of
the fiber connector.
Fiber Optic
Connector specifications
Insertion Loss (dB) ≤ 0.2 (UPC)
Temp. Range ≤ 0.2 dB (
- 40 to +80 degree centigrade)
|
