FO86306 Fiber Optic Identifier is an essential installation and maintenance instrument. By inserting the fiber into its adapter head, the fiber optic identifier can identify SM optical fibers without any damage by detecting the optical signals being transmitted through them so as to avoid the opening of the fiber at the splice point for identification and thus avoids the interruption of the service. In the presence of traffic, the intermittently audible tone is activated. This FO86306 fiber optic identifier also allows relative core power display and identification of the 270Hz,1kHz and 2kHz frequencies. When they are used to detect the frequency, the continuously audible tone is activated.

Feature:

* Efficiently identifies the traffic direction and frequency tone (270Hz, 1KHz, 2KHz) without any damage of the fibers;

* Display 3 levels of signal intensity;

* Low bending loss and high efficient output;

* Easy to replace adaptors (Ø0.25, Ø0.9, Ø2.0, Ø3.0 to satisfy various optical cable;

* Portable, compact size and easy-to-use

Application:

* Maintenance in Telecom
* Maintenance CATV
* Test Lab of optical fibers
* Other Fiber Optic Measurements

Specification:

Type	FO86306
Identified Wavelength Range	900-1650 nm
Identified Signal Type	CW, 270Hz±5%，1kHz±5%，2kHz±5%
Detector Type	Ø1mm InGaAs 2pcs
Adapter Type	Ø0.25 (Applicable for Bare Fiber)
	Ø0.9 (Applicable for Ø0.9 Cable )
	Ø2.0 (Applicable for Ø2.0 Cable )
	Ø3.0 (Applicable for Ø3.0 Cable )
Signal Direction	Left & Right LED
Signal Intensity	3 Levels of signal intensity
Signal Frequency	270Hz, 1kHz, 2kHz
Power Supply	One 9V Alkaline battery
Operating Temperature	-0－+50℃
Storage Temperature	-10－+70℃

Fiber Optic Test Instruments and Cable Assemblies manufacturer from China

Test Instruments, Fiber Optic Identifier, Fiber Optic

Fiber Optic Identifier