|
Judge
Fiber Optic Patch Cords Quality
1. Check the fiber optic patch cords insertion loss. For all kinds of
fiber optic patch cords, insertion loss is the most important technical
parameter; typical good quality fiber optic patch cord insertion loss
should be 0.2dB or less. Insertion loss refers to when you connect the
fiber optic patch cable to the equipment for linking, how much of the
fiber optic light will be lost during this insertion process, certainly
it is as low as better. Forever Optic is able to offer super
quality fiber optic patch cords if needed - insertion loss is less than
0.1dB.
2. Check the fiber optic cable type, what kind of cables are used? Riser
rated? Plenum rated? OFNR or OFNP. If you are going to sell to the fiber
optic patch cords to the European Union, you should also check with them
whether their products are RoHS compliant - to protect the health of the
end user, this is required by law of Euro.
3. Check what kind of fiberglass are used to make the fiber optic patch
cords, the fiberglass is the key part in the cable to make data
transmission; first class fiber is made by the U.S.A Company Corning. If
you want a best quality you can choose fiber optic patch cords made with
original Corning cable, or at least, the key part that is the fiberglass
inside the cable, it is best to be made of American corning.
4. We have talked about the several key points to identify the fiber
optic patch cables quality. If there is any other query, please don't
hesitate to contact us.
|
